Fitting Skirting Boards


Skirting boards in an area are an extremely appealing and attractive finish that can actually bring a space to life. They are essentially there to hide the void in between the flooring as well as the plaster and prevent any type of impact damage to the plaster. They protect the walls from everyday knocks as well as scuffs as well as use a good level of longevity and also resistance.

In days passed, skirting boards were extremely deep, a lot to ensure that they were commonly suited two sections to attain the height. Nonetheless in more current years, the trend in skirting boards fashion has struck an even more of a happy medium where 125mm or 150mm boards are now extra widespread. Deep skirtings so not look to excellent in rooms with reduced ceilings either.

Skirting comes produced in various products and also in both soft and also hardwood. Redwood is quite preferred in the more affordable variety of wood yet the even more top quality skirting boards will be made from strong oak. The major advantage of utilizing Solid Oak Skirting boards is that due to Oaks intrinsic hardness it will conveniently take knocks as well as wear without damaging, nicking or requiring repainting.

Removing Old Skirting Boards

Eliminating the old skirting in place is relatively straightforward as well as you can do this with a hammer strengthen chisel and also crowbar. If you find a specifically stubborn area of skirting board it might have been fixed with nails or screws, which will be hard to find on the front of the skirting as the heads will be covered with filler. If you can locate the real screws protecting the board in place, you may have the ability to simply remove the screws prior to taking apart the old boards.


Before repairing your brand-new skirting board prepare those boards which will certainly meet at the edges of the area. Many edges are indicated to be square, so it complies with that suitable skirting boards around such a corner, the mitre cut would be 45 degrees, and to assist the exact cutting of such regular cuts, mitre blocks can be purchased pre-cut at this angle. Ideally though, mitre boxes are much better for cutting skirting boards, as they provide much better control. Read more tips on fitting skirting boards in this link.

An unequal floor may leave awful gaps below the skirting. To remedy this you can mark and reduce the bottom of the skirting so it will adhere to the account of the floor. You can press small wedges under the skirting board until it is level. Guarantee your brand-new skirting board coincides elevation as the one you are replacing, or else you will certainly have a void in between the top of the skirting as well as the bottom of the plaster, which will certainly require to be covered.

Wall surface

To attach the skirting to the wall a grab adhesive is ideal especially if you intend to stain or varnish the boards. This will certainly depend how straight the wall is though. If you are securing to a stud request wall surface you can simply toenail the skirting to the stud work or if it is a brick wall you can knock wood wedges into the gaps between the bricks and afterwards nail into the wedges.

If you are dealing with skirting to the wall surface of a lengthy room or corridor you might require to make a joint before getting to a corner. Prior to the angle can be moved to the skirting, the skirting board itself will need to be noted to show the setting of the mitre cut, which is done by positioning the board ready against the wall surface, and also noting the base of the skirting where the outside lines cross on the flooring, with another mark at the top at the plaster arris.

With the vast array of devices available these days, fitting skirting is rather a simple task. You might extremely quickly employ a gliding mitre saw from a tool hire purchase the day and also fit most skirtings extremely exactly with ease. With a little practise, you will soon be suitable skirting like a master craftsman.

Leave a Reply